I have used atomic a couple of times and have received nothing but great service! When we first bought our house, we hadn't moved to the area yet and weren't moving for another month. We drove down for a weekend to get the A.C. replaced, and found the sink in the master bath (that the previous owner just had installed) had flooded the whole bedroom. I believe it was Eric who helped us, and he was wonderful. Despite it being July, and no A.C, he took care of us without complaint. And because we were going back home in the next couple days he made sure to get it done quickly!Recently we decided to replace our water heater and didn't hesitate to call Atomic. Ryan and Zach helped us this time and provided the same level of service I expected! They were polite, clean and made sure everything went smoothly. Atomic is definitely a little pricer than some smaller companies, but you get what you pay for and I'd rather pay to get it done correctly the first time than later when your water line snaps in the master bathroom and you're out of town.
For details about apprenticeship or other opportunities in this occupation, contact the offices of the state employment service; the state apprenticeship agency; local plumbing, heating, and cooling contractors or firms that employ fitters; or local union–management apprenticeship committees. Apprenticeship information is available from the U.S. Department of Labor's Apprenticeship program online, or by phone at 877-872-5627.
Plumbers, pipefitters, and steamfitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.
Galvanized steel potable water supply and distribution pipes are commonly found with nominal pipe sizes from 3⁄8 inch (9.5 mm) to 2 inches (51 mm). It is rarely used today for new construction residential plumbing. Steel pipe has National Pipe Thread (NPT) standard tapered male threads, which connect with female tapered threads on elbows, tees, couplers, valves, and other fittings. Galvanized steel (often known simply as "galv" or "iron" in the plumbing trade) is relatively expensive, and difficult to work with due to weight and requirement of a pipe threader. It remains in common use for repair of existing "galv" systems and to satisfy building code non-combustibility requirements typically found in hotels, apartment buildings and other commercial applications. It is also extremely durable and resistant to mechanical abuse. Black lacquered steel pipe is the most widely used pipe material for fire sprinklers and natural gas.
Justin and Paul were extremely polite. They worked as quickly as they could and got my hot water heater replaced. I have two dogs that are a handful, and they learned their names and talked to them to help keep them calm, which meant a lot to me. I felt comfortable having them in my home. The customer service at the company was great as well, very helpful on the phone. I would recommend them.
Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]
James and Paul did an AWESOME job from start to finish with our toilet replacement and installation!! We unfortunately had a bad experience with our general contractor and his plumber and needed immediate assistance. I called Atomic and they immediately got me connected with a scheduler, then had James and Paul out to our house extremely fast! James and Paul were friendly, knowledgeable, professional, and efficient. They advised us based on their expertise and helped us pick out a new toilet and install it correctly. We are so grateful for their work and their professionalism. Would highly recommend them and hire them again!

I am not a plumber, but I am familiar with oxidation.  Many simple plumbing valves only need to be removed and new "O" rings installed.  That's where the problem comes in.  Most older homes used metal pipes and not PVC.  Usually the valve screws into a different type of metal and oxidation occurs between the two metals, almost becoming one.  In order to get the valve stem out you have to break it loose.  If you break the pipe, not only do you have a mess but then you have to pay to fix it.  Simple if you break it you pay.  If a plumber breaks it, he is responsible.  I recommend paying the plumbers fee and save yourselves headaches in the long run. 
The most common residential drain to cause problems is the kitchen sink drain. Food particles, grease, soap or detergent build up can all, over time, slow down or completely block the flow of water down to the septic or sewer system. A garbage disposal as well as an installed dishwasher add more pipes to the mix which create more potential for clogs.
Plumbers in Australia have licensing requirements that differ from state to state but it is generally accepted a 4-year apprenticeship with a further minimum experience of 2 years (6 years total) and a further curricular requirement as a benchmark for licensing. Licensed plumbers are also expected to maintain minimum relevant training requirements to maintain their plumbing license
Our professional staff of qualified plumbers are highly familiar with New York City's unique plumbing structure, and we are here to provide each of our customers with the most professional and affordable plumbing service for any residential or commercial plumbing problems. Whether you are located in Manhattan, Queens, Bronx, Brooklyn, Staten Island or Westchester County - We are here 24/7 to handle any of your plumbing needs.
HOT WATER HEATER REPAIR AND INSTALATION Option One Plumbers in Phoenix, San Diego and the Inland Empire do installs, repairs, or replacements of all types of water heaters including electric, natural gas, propane, and tankless for both residential and commercial uses. We are your local water heater Phoenix, San Diego and the Inland Empire experts and have been servicing water heaters for decades.

Our professional staff of qualified plumbers are highly familiar with New York City's unique plumbing structure, and we are here to provide each of our customers with the most professional and affordable plumbing service for any residential or commercial plumbing problems. Whether you are located in Manhattan, Queens, Bronx, Brooklyn, Staten Island or Westchester County - We are here 24/7 to handle any of your plumbing needs.


If you have a major fix in your home, it’s important to shop around for a plumber to do the work. At least three bids will help you determine the range of the project, so you can weigh the pros and cons of price and the reputation of the plumbers. Get references and contact them. Also, a good plumber isn’t likely to nickel and dime you. For the smaller jobs, check out these 11 plumbing tricks.
Did you know that your tap water might contain traces of such harmful chemicals as lead, arsenic, cadmium, and pesticides? High levels of these and other toxins commonly found in drinking water are known to cause disease and damage organs. Having either a reverse osmosis or carbon-based water filtration system professionally installed by Baker Brothers Plumbing, Air Conditioning & Electrical is a great way to safeguard the health of your family by virtually eliminating the toxins in your tap water. Soon, you will find the water coming from your tap is pure and tastes clean, meaning you can use it for drinking, cooking, bathing, and laundry without issue.

Len The Plumber is a full service plumbing and drain cleaning company serving the entire Baltimore, Washington D.C., Northern Virginia, Delaware and the Philadelphia Area as well as Anne Arundel, Baltimore, Carroll, Cecil, Harford, Howard, Montgomery, Prince George’s, Charles, Fairfax, Alexandria, Arlington, Loudoun, Prince William, Falls Church, Manassas, Delaware, Chester, New Castle, and Stafford counties. We are continuing to grow and expand our service areas so please continue to check-in to see if we are in your area and always feel free to call if you have a question. Our service area map shows all the counties and district that we currently serve.


Flexible plastic tubing can be used to circulate hot water below your home’s flooring. This is known as hydronic heating. The water/liquid is stored in a boiler and pushed into a plumbing manifold so that it can be properly circulated throughout your home floors as designed. While this is a very beneficial way to radiate heat through your floors during colder seasons, hydronic heating can develop some serious problems that require plumbing repair.
For Plumbers, working in the bustling city of Seattle has its advantages, including an above-average pay rate. Plumbers will also find cushy salaries in Boston (+31 percent), Chicago (+23 percent), New York (+19 percent), and Washington (+16 percent). Those in the field find the lowest salaries in Charlotte, 14 percent below the national average. Below-median salaries also turn up in Miami and Orlando (10 percent lower and 9 percent lower, respectively).
Since 1991, we have provided our customers with dependable plumbing services—everything from replacing or installing kitchen and bathroom faucets, water heaters, hose bibs, and ice makers to whole or partial house re-piping, installing pressure reducing valves (PRVs) to aid in water conservation efforts, repairing leaks in water lines, or providing all new plumbing for remodels, room additions, or new house construction. We charge by the job, not by the hour.
James and Aron came to my condo to unclog the kitchen sink, which took a bit of doing (due to my inappropriate use of the disposal - egg shells - a big no). The line had to be snaked twice. Not a pretty task. Both James and Aron were professional in their manner, carefully explaining everything they needed to do, what the cost would be, and advice for future use. An additional job was added as I needed to replace the kitchen faucet. They made arrangements to get the proper faucet replacement and that job was done all in the same day (saving me a return trip fee). These pros were polite, competent, and knew how to explain every aspect of the job in language a novice could understand. I have another unrelated job that I will be requesting Atomic and the James/Aron team to handle. I highly recommend this company! They shoot straight and get the job done in a timely, cost-efficient manner. Great customer service all around! Thank you.
Present-day water-supply systems use a network of high-pressure pumps, and pipes in buildings are now made of copper,[25] brass, plastic (particularly cross-linked polyethylene called PEX, which is estimated to be used in 60% of single-family homes[26]), or other nontoxic material. Due to its toxicity, most cities moved away from lead water-supply piping by the 1920s in the United States,[27] although lead pipes were approved by national plumbing codes into the 1980s,[28] and lead was used in plumbing solder for drinking water until it was banned in 1986.[27] Drain and vent lines are made of plastic, steel, cast-iron, or lead.[29][30]
Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year. In the classroom, apprentices learn safety, local plumbing codes and regulations, and blueprint reading. They also study mathematics, applied physics, and chemistry. Apprenticeship programs are offered by unions and businesses. Although most workers enter apprenticeships directly, some start out as helpers. The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.
Bob Carter started as with plumbers Indianapolis and moved his family to Greenwood in the late 1960’s.  He continued to do plumbing in Indianapolis and soon became a plumber in Greenwood as well.  Fast forward to today… Carter’s My Plumber is a 3rd Generation, family-owned Plumbing business operating from Greenwood, and serving the Indianapolis metro area. Son, Jamie and Grandson, Kelson now run the family business.

Rooter Plumbing Co

×