Plumbers install and repair water, drainage, gas, and other piping systems in homes, businesses, and factories. Plumbers install plumbing fixtures such as bathtubs and toilets, and appliances, such as dishwashers and water heaters. Plumbers also maintain septic systems—the large, underground holding tanks that collect waste from houses that are not connected to a sewer system.
To work independently, a plumber is required to receive a license. In most states, the prerequisite for earning this license is two to five years of practical experience. There's also an exam to test technical know-how and understanding of plumbing codes. The United Association's website offers extensive information on licensing requirements by state.
Get a minimum of three bids. Estimates for an average-sized job should be within a few hundred dollars. Be suspicious of anything that is substantially lower or double the price of the rest, and watch out for hidden fees, like charges for travel expenses. They could be signs of a home improvement scam. A good plumber will not nickel and dime you like this, and many of us will offer free estimates.
Similarly, there's no shortage of different types of sinks, too. These range from spare single-bowl models starting under $100 to a farmhouse apron front, double bowl made of copper or cast iron that can run $600 or more. Some are mounted under countertops — called undermount sinks — while drop-in sinks are designed for installation in a preexisting space in your countertop. Whatever the type, sinks can uniquely complement kitchen design as do countertops, cabinetry and other features.
Outstanding, friendly, reasonably priced, and professional work! Atomic Plumbing provided excellent service from the timely response, to my call to updates prior to their arrival time, to the actual work conducted on site. They provided me with options and didn't try and strong arm us into service we didn't need. They stayed with us until we could verify the service was complete (and the toilet didn't back up again) and ensured we had peace of mind about the work that was done before they left. I asked for additional service to be completed on the upstairs bathroom shower and the technician, James M., provided an initial assessment for free and gave me options. Once I determined it was going to need his expertise, he quickly and efficiently got to work and fixed that problem too. They were military friendly and provided me a 10% discount which for a family of five on a single income, every little bit helps! I would STRONGLY recommend Atomic over the other guys any day of the week! Thank you Atomic! -Nick R.
Several types of pipe were used during the nineteenth century. With little or no knowledge of its possible long-term harmful effects, lead pipe was widely used. Its low price and the ease with which it could be formed and joined made it the material of choice for many installations. Iron, brass, and copper pipe were used as well. It was not unusual for a structure to be plumbed with several types of pipe, each used where it was most suited. But by the early twentieth century there was a move away from lead piping. The basic elements of domestic plumbing, in both the kitchen and bathroom, were in place by the 1890s. Changes since that time have been primarily aesthetic and in the materials used. During the second half of the twentieth century, tubs and basins that previously had been made of glazed ceramic or enameled iron, and much of the pipe manufactured in the United States as well, were being made of plastic.
The introduction of the first water-retaining traps or seals in the 1850s, and the common use of "U"-shaped traps in the 1870s, were major steps forward. The design of the trap ensured that enough water remained in it to effectively block the passage of sewer gas back through the plumbing fixtures. During the 1870s vent pipes were introduced. They not only carried sewer gas out of the system, but also broke the suction created by movement of liquid in the pipes and eliminated the possibility of siphoning water that sealed the traps.
Of course, some repairs are easier and quicker to handle than others. Some are a major hassle—particularly those that involve working on pipes that are hidden behind walls or under floors or are otherwise difficult to access. This doesn’t mean you can’t do them yourself, it just means you may need a little more instruction, a few more tools, and a load of patience.
Bob Carter started as with plumbers Indianapolis and moved his family to Greenwood in the late 1960’s.  He continued to do plumbing in Indianapolis and soon became a plumber in Greenwood as well.  Fast forward to today… Carter’s My Plumber is a 3rd Generation, family-owned Plumbing business operating from Greenwood, and serving the Indianapolis metro area. Son, Jamie and Grandson, Kelson now run the family business.

We are very satisfied with Atomic Plumbing and with Brian H. The office was helpful and up front with how the service call would be handled. I was informed of the payment forms that would be acceptable. I was able to schedule the appointment to fix a leaky toilet for the day and time suited to my convenience. I was called when they were on the way and after explaining what he felt was wrong and what he would do to repair it and the overall cost if he found nothing else, he got straight to work and was finished within an hour. He put vinyl covers over his shoes upon entering the house and was very respectful. What a refreshing experience and you can be confident they won't rip you off! Thank you Atomic Plumbing and Brian H!
We had a Saturday evening before Easter emergency when our water heater began leaking. We got the water turned off and contacted Atomic Plumbing. Their friendly appointment person told us they would have someone here the next morning, Easter! Jim came at 11 am and told us it would be best to replace it. We told him to go ahead. They went out and got a high quality one as we requested and installed it in a few hours. Very professional and kept us informed along the way. We appreciate Atomic Plumbing.
Similarly, there's no shortage of different types of sinks, too. These range from spare single-bowl models starting under $100 to a farmhouse apron front, double bowl made of copper or cast iron that can run $600 or more. Some are mounted under countertops — called undermount sinks — while drop-in sinks are designed for installation in a preexisting space in your countertop. Whatever the type, sinks can uniquely complement kitchen design as do countertops, cabinetry and other features.
Faucets for the kitchen come in an array of styles, and costs vary as well, from simple single handle models running less than $50 to pull down faucets like those used in restaurant kitchens costing more than $200. One handle or two, separate pullout sprayer or pull down, countertop or wall mount, these also feature a variety of finishes from stainless steel to nickel and bronze.

"If you EVER need an affordable plumber make sure you reach out to North Texas Plumbing Services 817-230-7586. Justin went above and beyond to work with us. We had a broken pipe under our concrete slab that needed to be replaced. Contacted North Texas Plumbing Services, they came out to give us a quote that day. We called them to accept their bid that same night, and the very next day they had their digging crew to begin the tunneling process. Everyone did a great job of keeping us updated throughout the entire process! After the pipe was replaced the diggers informed us we would have extra dirt left over and asked what would we like to do with it? We told them we would like it placed in the back yard, and unexpectedly, they also spread it out neatly for us."
Wedgeworth Plumbing, is a Texas (TX) Plumbing, Water Heater, Piping, Drain Cleaning, Sewer & Water Line service, replacement and maintenance Company located in Houston area. Wedgeworth Plumbing employs only the best technician and plumber for plumbing repair, water heater repair, and piping repair as well as plumbing replacement, sewer & water line replacement, and water heater replacement in Baytown TX, Bellaire TX, Cypress TX, Deer Park TX, Dickinson TX, Friendswood TX, Houston TX, Katy TX, Kemah TX, La Porte TX, League City TX, Missouri City TX, North Houston TX, Pasadena TX, Pearland TX, Richmond TX, Rosenberg TX, Santa Fe TX, Seabrook TX, South Houston TX, Spring TX, Stafford TX, Sugar Land TX, and Webster TX. So when you ask to find "A good plumbing repair or service company near me", you've come to the right place. To set-up a repair service estimate or replacement estimate, call (832) 867-5309. Wedgeworth Plumbing services all plumbing, piping, filter, and water heater brands including AO Smith, Bradford White, Rheem, Rinnai, State Water Heaters, among many others.
If left unfixed, a running toilet or a leaky faucet can end up costing you hundreds of dollars. Check out your water bill and how your water is running. If you find your kitchen dripping non-stop and your water bill going higher, you may have a leak! Let Parker & Sons put a stop to those leaks. Our team of expert plumbers will make sure to get the work done faster, get it right the first time, and do it efficiently.
Average Americans work well into their 60s, so workers might as well have a job that’s enjoyable and a career that's fulfilling. A job with a low stress level, good work-life balance and solid prospects to improve, get promoted and earn a higher salary would make many employees happy. Here's how Plumbers job satisfaction is rated in terms of upward mobility, stress level and flexibility.
Bob Carter started as with plumbers Indianapolis and moved his family to Greenwood in the late 1960’s.  He continued to do plumbing in Indianapolis and soon became a plumber in Greenwood as well.  Fast forward to today… Carter’s My Plumber is a 3rd Generation, family-owned Plumbing business operating from Greenwood, and serving the Indianapolis metro area. Son, Jamie and Grandson, Kelson now run the family business.
Occupational employment projections are developed for all states by Labor Market Information (LMI) or individual state Employment Projections offices. All state projections data are available at www.projectionscentral.com. Information on this site allows projected employment growth for an occupation to be compared among states or to be compared within one state. In addition, states may produce projections for areas; there are links to each state’s websites where these data may be retrieved.

Alexa is an experienced lifestyle and news writer, currently working with Reader's Digest, Shape Magazine, and various other publications. She loves writing about her travels, health, wellness, home decor, food and drink, fashion, beauty, and scientific news. Follow her traveling adventures on Instagram: @living_by_lex, send her a message: [email protected], and check out her website: livingbylex.com
Are you worried about the corrosion in your plumbing or have you had leaks in the past? Option One Plumbing in Phoenix, San Diego and the Inland Empire offers affordable solutions to re-plumbing your home with copper or alternatives that exceed today’s standards and last longer. If you are looking for an experienced repiping plumber in Phoenix, San Diego and the Inland Empire, look no further.
Most plumbers, pipefitters, and steamfitters learn their trade through a 4- or 5-year apprenticeship. Apprentices typically receive 2,000 hours of paid on-the-job training, as well as some classroom instruction, each year. In the classroom, apprentices learn safety, local plumbing codes and regulations, and blueprint reading. They also study mathematics, applied physics, and chemistry. Apprenticeship programs are offered by unions and businesses. Although most workers enter apprenticeships directly, some start out as helpers. The Home Builders Institute offers a pre-apprenticeship training program in plumbing and other trades.

Cleaning your toilet is likely a top priority when it comes to house maintenance, but you’re doing more harm than good if you use chlorine tablets. They can cause the toilet’s flushing system to malfunction by disintegrating it and getting stuck in the flush valve. Check out these 28 tips to become a master plumber and avoid unnecessary calls to the experts!
Plumbers, pipefitters, and steamfitters may use many different materials and construction techniques, depending on the type of project. Residential water systems, for example, use copper, steel, and plastic pipe that one or two plumbers can install. Power plant water systems, by contrast, are made of large steel pipes that usually take a crew of pipefitters to install. Some workers install stainless steel pipes on dairy farms and in factories, mainly to prevent contamination.
JAG PLUMBING PRODUCTS is very pleased to partner JAG PLUMBING PRODUCTS is very pleased to partner with BRIGGS Plumbing Products USA to act as the direct distributor of the prestigious BRIGGS and Sayco Brand line of Repair Parts. This 2-pack of Toilet tank flappers are the exact replacement required to fix your BRIGGS Toilet. JAG PLUMBING PRODUCTS strives ...  More + Product Details Close
Whether you’re in the market for a gas, electric, tankless, or high-efficiency water heater, we can help you get it fast. We offer same-day water heater installation so you can enjoy your new water heater as soon as possible. If you call us by 3:00 p.m., we’ll have your water heater up and running by the end of the day; call after 3:00 p.m. and we’ll make sure it gets done the next day.
Master plumbers on construction jobs may be involved with developing blueprints that show the placement of all the pipes and fixtures. Their input helps ensure that a structure’s plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires. Many diagrams are now created digitally with the use of Building Information Modeling (BIM), which allows a building’s physical systems to be planned and coordinated across occupations.
Justin D and Eric worked on four leaky spots in one afternoon replacing toilet parts, bathroom sink fixtures, shower fixtures and an ancient outdoor spigot that required going into the crawl space. All were done efficiently and with detailed explanations. Additionally, each work area was left completely cleaned up. I appreciate that they also alerted me to a duct work problem under the house which I may not have discovered for some time. My parents, also customers, and I are happy to give a big thumbs up to Atomic Plumbing. Thank you Justin D and Eric! Good team!
Great experience, despite the plumbing issue! Ryan D was on time, professional, efficient and quickly identified our issue. He explained our options, including estimated costs and then proceeded to get everything back in working order for us. I was impressed that he wore shoe coverings inside the home, laid out a mat in the work area, and under the sink. There was literally no clean up needed on our part. We would call them again and recommend them to others! Job well done!
Payment schedule: On a big job, especially a planned remodeling, the service provider may want the customer to pay 10 to 15 percent of the cost up front and 50 percent paid before the job is completed — especially if expensive materials need to be purchased for the project. Make sure you know what is expected. If you're suspicious, contact your state's professional licensing board or contracting board to ask about local standards. Many states set limits on what is allowed to be paid upfront.

Bob Carter started as with plumbers Indianapolis and moved his family to Greenwood in the late 1960’s.  He continued to do plumbing in Indianapolis and soon became a plumber in Greenwood as well.  Fast forward to today… Carter’s My Plumber is a 3rd Generation, family-owned Plumbing business operating from Greenwood, and serving the Indianapolis metro area. Son, Jamie and Grandson, Kelson now run the family business.

Rooter Plumbing Co

×