For the highest quality, expertise and excellent customer service you seek for all your plumbing repairs and plumbing installation needs, contact Baker Brothers Plumbing, Air Conditioning & Electrical at 214-892-2225214-892-2225 to schedule an appointment. Our licensed Dallas Plumbing technicians are background checked and drug-screened, ready to provide you with the best possible service in the DFW metroplex.

I am not a plumber, but I am familiar with oxidation.  Many simple plumbing valves only need to be removed and new "O" rings installed.  That's where the problem comes in.  Most older homes used metal pipes and not PVC.  Usually the valve screws into a different type of metal and oxidation occurs between the two metals, almost becoming one.  In order to get the valve stem out you have to break it loose.  If you break the pipe, not only do you have a mess but then you have to pay to fix it.  Simple if you break it you pay.  If a plumber breaks it, he is responsible.  I recommend paying the plumbers fee and save yourselves headaches in the long run. 


Sometimes a faucet leak can be stopped by replacing the rubber washer at the end of a faucet stem or cartridge.  This is a more common repair on older fixtures when things were built to last and designed to be able to be maintained.  Other times the whole stem or cartridge needs replacement or the bibb seat deeper back into the fixture needs replacement.  That leads to matching up the right components and often times making a trip to the hardware store or plumbing supply house necessary due to the many varieties, makes and models of faucets.  My advice is to make sure your Plumber has faucet repair kit on their truck before having them come out to assess the issue.
I think it is rather rude and a bit dishonest for people to not divulge their total fees upfront, an of course we should know to ask. But the normal person wouldn't know the questions to ask until they are burnt once like this, and then there still could be costs for walking up stairs or charge another service call if they need to go somewhere to use the bathroom and come back. THAT ISN'T A QUESTION I WOULD THINK TO ASK.
DoItYourself.com®, founded in 1995, is the leading independent home improvement and repair website. We welcome your comments and suggestions. All information is provided "AS IS." Website operating problems contact [email protected] Questions of a Do It Yourself nature should be submitted to our "DoItYourself.com Community Forums". Copyright © 1995-2018 MH Sub I, LLC dba Internet Brands. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here.
The Oatey 8 oz. Handy Pack Purple Primer The Oatey 8 oz. Handy Pack Purple Primer and Solvent Cement contains code-listed primer and solvent cement needed for solvent-welding PVC pipe and fittings. Can be used with up to 4 in. Dia piping. Convenient Handy Pack for storage - just add pipe and fittings. Due to the nature of ...  More + Product Details Close

Sump pumps are used to re-route water away from the lowest point of your home's foundation and protect your basement and easily damaged areas from flooding. In most cases, your sump pump is hardwired to your electrical system or possibly plugged into a wall outlet. Because these power sources can often fail in a storm when water damage occurs, sump pumps are typically equipped with battery backup power.
late 14c. (from c.1100 as a surname), "a worker in any sort of lead" (roofs, gutters, pipes), from Old French plomier "lead-smelter" (Modern French plombier) and directly from Latin plumbarius "worker in lead," noun use of adjective meaning "pertaining to lead," from plumbum "lead" (see plumb (n.)). Meaning focused 19c. on "workman who installs pipes and fittings" as lead water pipes became the principal concern of the trade. In U.S. Nixon administration (1969-74), the name of a special unit for investigation of "leaks" of government secrets.

Each Government at the state level has their own Authority and regulations in place for licensing plumbers. They are also responsible for the interpretation, administration and enforcement of the regulations outlined in the NCC.[38] These Authorities are usually established for the sole purpose of regulating plumbing activities in their respective states/territories. However, several state level regulation acts are quite outdated, with some still operating on local policies introduced more than a decade ago. This has led to an increase in plumbing regulatory issues not covered under current policy, and as such, many policies are currently being updated to cover these more modern issues. The updates include changed to the minimum experience and training requirements for licensing, additional work standards for new and more specific kinds of plumbing, as well as adopting the Plumbing Code of Australia into state regulations in an effort to standardise plumbing regulations across the country.[39]
Much of the plumbing work in populated areas is regulated by government or quasi-government agencies due to the direct impact on the public's health, safety, and welfare. Plumbing installation and repair work on residences and other buildings generally must be done according to plumbing and building codes to protect the inhabitants of the buildings and to ensure safe, quality construction to future buyers. If permits are required for work, plumbing contractors typically secure them from the authorities on behalf of home or building owners.[citation needed]

Cleaning your toilet is likely a top priority when it comes to house maintenance, but you’re doing more harm than good if you use chlorine tablets. They can cause the toilet’s flushing system to malfunction by disintegrating it and getting stuck in the flush valve. Check out these 28 tips to become a master plumber and avoid unnecessary calls to the experts!
Payment schedule: On a big job, especially a planned remodeling, the service provider may want the customer to pay 10 to 15 percent of the cost up front and 50 percent paid before the job is completed — especially if expensive materials need to be purchased for the project. Make sure you know what is expected. If you're suspicious, contact your state's professional licensing board or contracting board to ask about local standards. Many states set limits on what is allowed to be paid upfront.
It only seems right to put cleaning supplies, like sponges, rags and liquids, under the sink, but plumbers say NO to this. Besides just being in the way, they can cause trap leaks. Drain traps, which are the curved pipes under the sink, are meant to keep sewer gases from entering your home, while also allowing waste water to pass. Blocking them off with clutter ups the risk of your cleaning products and trash can bumping into the pipes and dislodging them. Don’t feel bad if you’ve made a plumping mistake. Here are 36 almost unbelievable plumbing and electrical goofs.

Our goal in business is to treat all of our customers like friends; always treating them with respect, fairness, and honesty. We are a family owned and operated Connecticut plumbing company, and because of this all of our customers receive the attention that they deserve. Mike Marandino, the owner of the company, (as well as master plumber) works out on the road right alongside his employees. He or his wife handles all calls personally and it's the personal touch that makes us special. We strive for 100% satisfaction, and if for any reason a customer of ours isn't satisfied we promise we'll make it right.
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.
You may or may not need a plumber to tighten the drain pipe to stop this particular leak, but what if that drip were behind the wall in your kitchen or bathroom, or behind a refrigerator or washing machine, where you may never see it until the water damage is so great it begins to grow mildew inside the walls causing a distinct odor in your room or entire house.
If you decide to try this job yourself, be prepared to keep meticulous track of about a dozen tiny parts (put the stopper in the sink so none of them fall down the drain). There are many different faucet designs, so you may not be able to tell what to replace until you've done the disassembly. Whether you do it yourself or hire a plumber, this would be a good time to think about whether you want to upgrade the faucet with a new design.
Option One Plumbing & Rooter is now offering commercial hydro jetting in Phoenix, San Diego and the Inland Empire to our residential customers. Our process utilizes high-pressure water to effectively cut tree roots and emulsify grease. Sewer jetting is the application of streams of high-pressure water for use within pipes for cleaning & debris removal. Our experienced hydro jet plumbers in Phoenix, San Diego and the Inland Empire are local experts and all of work comes with a warranty.
Pipefitters, sometimes simply called fitters, install and maintain pipes that carry chemicals, acids, and gases. These pipes are used mostly in manufacturing, commercial, and industrial settings. Fitters install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize as gasfitters, sprinklerfitters, or steamfitters.
You need the right tools when repairing your plumbing systems or installing new devices. Menards® has a large variety of plumbing tools, including pipe threading; plumbing hand tools; plumbing tool kits; and torches and soldering tools. Keep your drains clean and free of clogs with our drain cleaning equipment and supplies, including hand, chemical, and powered solutions.

Some of the most daunting plumbing disasters we can easily handle with our experience and our skill. You may be facing complex problems like flooding or drainage malfunction that you do not know how to fix. At Roto-Rooter, we are specially trained in providing water-proofing services to keep you flood-free. With our quality sump pumps, drains, piping, and other professional plumbing strategies, you can keep water damage at bay. We provide sump pump repair and other leading services so that your needs are always met.
Menards® has all the plumbing supplies you need to ensure your plumbing systems will last for years. Our water systems will keep your entire home running smoothly. We offer a variety of landscape drainage and watering and irrigation products for any home. Menards® offers water heaters for both residential and commercial buildings as well as storage tanks. Keep your water fresh and clean with our water filtration and softeners. Our whole house filtration systems will keep all of the water in your home clean and pure. We also offer water softeners to prevent hard water issues. Enjoy fresh, cool water with one of our water coolers. If you use well water, we have many pumps and well tanks as well as the accessories needed to keep it running smoothly. Our BIG selection includes sump and utility pumps, well pumps and well tanks, sewage pumps, and sprinkler pumps. We have a wide selection of rough plumbing items and pipe, tubing, hoses, fittings, and accessories to complete a variety of plumbing projects. You can also repair your plumbing systems or install new pieces with our plumbing installation and repair products. Our hydronic radiant heat systems are a great addition to commercial or pole barn buildings.
I was disappointed with the pressure of a tub and shower that were plumbed with 1/2 supply lines (2nd floor). Could be low pressure from the street, but I want to replace with 5/8. Plus, I'd like to have 2 back to back showers, one inside and one outside. So, I had intended to bring a 1 supply to both, then branch up to valves and shower head with 5/8. Finally, I thought pressure from the street was typically 55 to 70 psi and I am concerned if pvc can take that.Any thoughts?

Rooter Plumbing

×