Galvanized steel potable water supply and distribution pipes are commonly found with nominal pipe sizes from 3⁄8 inch (9.5 mm) to 2 inches (51 mm). It is rarely used today for new construction residential plumbing. Steel pipe has National Pipe Thread (NPT) standard tapered male threads, which connect with female tapered threads on elbows, tees, couplers, valves, and other fittings. Galvanized steel (often known simply as "galv" or "iron" in the plumbing trade) is relatively expensive, and difficult to work with due to weight and requirement of a pipe threader. It remains in common use for repair of existing "galv" systems and to satisfy building code non-combustibility requirements typically found in hotels, apartment buildings and other commercial applications. It is also extremely durable and resistant to mechanical abuse. Black lacquered steel pipe is the most widely used pipe material for fire sprinklers and natural gas.

Since 1991, we have provided our customers with dependable plumbing services—everything from replacing or installing kitchen and bathroom faucets, water heaters, hose bibs, and ice makers to whole or partial house re-piping, installing pressure reducing valves (PRVs) to aid in water conservation efforts, repairing leaks in water lines, or providing all new plumbing for remodels, room additions, or new house construction. We charge by the job, not by the hour.

Those who attempted to bring plumbing indoors faced technical as well as attitudinal challenges. Decisions on how wastewater was removed required as much concern as those made to ensure an adequate water supply. But equally vexing was the prevailing miasma theory of disease, which held that illnesses stemmed from "bad air" that was readily identifiable by its offensive odor. This led to a distrust of early indoor plumbing that tended to leak and a deadly fear of the sewer gas that accompanied the leaks. It is no wonder then that many individuals maintained a strong belief that elimination was best taken care of out of doors.
“Don’t assume that every Mr. Fix-it advertising his services in the local Pennysaver or on Craigslist is a licensed plumber,” says one New York plumber. There is no national standard for issuing licenses. Some plumbers are licensed by the state, others by the counties they work in. Check with your local city hall or chamber of commerce. They should be able to direct you to the appropriate source for a list of licensed plumbers in your area.
plumbers must be asked directly what they charge hourly and if that is in addition to a service charge. The two are separate and I think they have gotten away with outrageous charges because of the potential of water damaging homeowner structures.   I had a plumber (not Home advisor) come and replace a part in my kitchen sink that was under warranty---the spray nozzle had been leaking...He charged me $85.00 for 15 minutes of work and I will never use Mr King again. 
Ryan arrived right on time and was very cordial and friendly. He got right to work and provided me a very thorough description of the things that needed attention, and subsequently provided pricing for each of the requested service options and the extras that were also identified. He really did a great job and we were extremely satisfied. I recommended your company to a friend yesterday, and will definitely continue to use and recommend your company for future plumbing needs!Bravo Zulu Ryan.
Called in on Wednesday evening to schedule a new sink hookup and was put on the schedule for Friday morning with no problems. Ryan arrived and took a look at what I had, gave some recommendations and provided a couple quotes. He took his time and made sure everything he installed was the most efficient and correct for my setup. We will continue to use and strongly recommend Atomic Plumbing.
An apprenticeship is the most common pathway to becoming a plumber. Many unions and businesses mandate that an apprentice receive a minimum of 246 hours of technical education, which could include instruction in math, applied physics and chemistry, and up to 2,000 hours of paid, practical training working with an experienced plumber. Safety training is also an important component of the process, since injuries are common in this line of work. "We have many hours worth of [Occupational Safety and Health Administration] training before we go on to a job site," says Patrick Kellett, the administrative assistant to the general president for the United Association of Journeymen and Apprentices of the Plumbing, Pipe Fitting Industry of the United States, Canada and Australia. "We're very conscious of the dangers that come with working in construction."
Your water heater is an essential part of your home, heating water for showers, dishwashing, laundry and more. On average, a traditional water heater will last 8-12 years. The general consensus is that it’s better to replace your water heater with a new one than to repair one that’s 10 years old or more. Older models are less energy-efficient and thus more costly to run than newer models with better technology. Here are some indicators of when it may be time to replace an old water heater instead of repairing it:
Assuming that you do not heat water over an open fire when you want to shower or do the dishes, you probably use a modern water heater in your home. If this is the case, you know just how convenient this particular appliance can make your day-to-day life. When you are ready to have a new water heater installed in your home, or if you need a water heater repaired or just tuned up, call one of our team members. We’ll make sure that you are able to heat water for use throughout your home with the reliability and the efficiency that you deserve.
We provide a wide range of services from leaky faucets to water heater replacements and repairs. We proudly install American made Bradford-White brand water heaters. We service what we sell. That means should anything ever happen just give us a call. We can fix it for you. We also typically handle water heater replacements and repairs the same day. We frequently receive calls from customers who purchased water heaters from companies like Sears and Home Depot and are unable to get service on their water heater for 2 or 3 days.That is absurd! We understand your situation and promise to come out and help as soon as possible.

Becoming a plumber is a two-pronged process that includes practical training and study. Traditionally, a hopeful plumber begins a four- or five-year apprenticeship program to receive technical education and complete the required hours of on-the-job training under a licensed professional. Plumbers who have successfully completed their apprenticeship are known as journeymen.
HOT WATER HEATER REPAIR AND INSTALATION Option One Plumbers in Phoenix, San Diego and the Inland Empire do installs, repairs, or replacements of all types of water heaters including electric, natural gas, propane, and tankless for both residential and commercial uses. We are your local water heater Phoenix, San Diego and the Inland Empire experts and have been servicing water heaters for decades.
Average Americans work well into their 60s, so workers might as well have a job that’s enjoyable and a career that's fulfilling. A job with a low stress level, good work-life balance and solid prospects to improve, get promoted and earn a higher salary would make many employees happy. Here's how Plumbers job satisfaction is rated in terms of upward mobility, stress level and flexibility. Click Here
×