If you have a major fix in your home, it’s important to shop around for a plumber to do the work. At least three bids will help you determine the range of the project, so you can weigh the pros and cons of price and the reputation of the plumbers. Get references and contact them. Also, a good plumber isn’t likely to nickel and dime you. For the smaller jobs, check out these 11 plumbing tricks.
Our professional staff of qualified plumbers are highly familiar with New York City's unique plumbing structure, and we are here to provide each of our customers with the most professional and affordable plumbing service for any residential or commercial plumbing problems. Whether you are located in Manhattan, Queens, Bronx, Brooklyn, Staten Island or Westchester County - We are here 24/7 to handle any of your plumbing needs.

Wooden pipes were used in London and elsewhere during the 16th and 17th centuries. The pipes were hollowed-out logs, which were tapered at the end with a small hole in which the water would pass through.[16] The multiple pipes were then sealed together with hot animal fat. They were often used in Montreal and Boston in the 1800s, and built-up wooden tubes were widely used in the USA during the 20th century. These pipes, used in place of corrugated iron or reinforced concrete pipes, were made of sections cut from short lengths of wood. Locking of adjacent rings with hardwood dowel pins produced a flexible structure. About 100,000 feet of these wooden pipes were installed during WW2 in drainage culverts, storm sewers and conduits, under highways and at army camps, naval stations, airfields and ordnance plants.

Here at Schuler Service we are always looking for ways to innovate for our customers. Our technicians have always been licensed, insured, and background checked but to provide our customers their peace of mind we have now partnered with TheSeal.com! You want your home to be safe and so do we. For more information on your local Allentown experts at Schuler Service click here or call us today at (610) 434-7103 for fast service and peace of mind.
In urban areas, the emptying of chamber pots straight into the street, and the accumulation of piles of human waste, resulted in disease and an unpleasant urban environment. Night-soil men were often employed to collect excreta, which was spread on the fields as fertilizer. Although Sir John Harrington had developed an indoor flushing toilet for Queen Elizabeth I in 1596, it was not until the rise of mass industrialization and urbanization in the nineteenth century that domestic toilets were mass-produced in northern England. Flushing technology was improved through the efforts of inventive manufacturers such as John Shanks, George Jennings, Alexander Cummings, and Thomas Crapper in the United Kingdom (Reyburn 1969) and Thomas Maddocks, John Randall Mann, William Campbell, and Henry Demarest, among others, in the United States (Palmer 1973). Early toilet manufacturers were generally companies that had first made their name in the manufacture of china and earthenware. Such English companies as Minton, Twyford, and Doulton adapted their production processes to make porcelain toilet bowls and pans. Toilet design was based upon the “sit” rather than “squat” mode of excretion (which required nothing more than a hole in the ground). The sit approach required a specific and highly marketable consumer product, the “pedestal” toilet, along with all the plumbing fixtures, such as taps (faucets), cisterns, basins, and fittings that together made up the “bathroom.” Interestingly, urinals for men, although a common feature of public toilets, are not generally a feature of private domestic bathrooms. These artifacts were exported from Britain to the rest of the world as a sign of modernity and Western progress, and were rapidly adopted for fear of being seen as “backward” or “dirty,” in spite of the fact that the majority of the world’s population squats when eliminating waste, a position that is ergonomically more healthy and efficient.
At Wayne’s Plumbing Repair, we proudly serve Charlotte, Matthews, Mint Hill, Indian Trail, Pineville, and Weddington, North Carolina with professional plumbing services. We can replace fixtures, install pressure-reducing valves (PRVs), repair water lines, or even install plumbing in a newly built home. Our friendly and knowledgeable technicians are even available for emergency service 24 hours a day. Our top-notch plumbing services include: Water Heater Repair, Toilet Repair, Garbage Disposal Repair, Faucet Repair, Pipe Repair.

Becoming a plumber is a two-pronged process that includes practical training and study. Traditionally, a hopeful plumber begins a four- or five-year apprenticeship program to receive technical education and complete the required hours of on-the-job training under a licensed professional. Plumbers who have successfully completed their apprenticeship are known as journeymen.


plumbers must be asked directly what they charge hourly and if that is in addition to a service charge. The two are separate and I think they have gotten away with outrageous charges because of the potential of water damaging homeowner structures.   I had a plumber (not Home advisor) come and replace a part in my kitchen sink that was under warranty---the spray nozzle had been leaking...He charged me $85.00 for 15 minutes of work and I will never use Mr King again. 
The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[19]

Try a plunger: If it's a double sink, use a wet rag or rubber stopper to block the other drain. Place the plunger directly over the drain until it forms an air-tight seal. If you have trouble forming an air-tight seal with the plunger, run it under some hot water to make it more flexible. Move the plunger up and down to dislodge the clog from the drain.


 Our Water Heater failed and flooded our attic on the weekend. They answered the phone and had someone out the same day. By the next day, we had a new water heater installed and hot water, all over the weekend. They were quick and professional. Justin D answered all my questions and took the time to explain. When speaking to Justin it was clear that he cared and was well trained in customer experience. Thank you all for making a stressful situation a little easier to deal with. We appreciate your services. 

We have been fixing slab leaks in Phoenix, San Diego and the Inland Empire for decades. A common plumbing problem in Phoenix, San Diego and the Inland Empire is when there is a leak under the floor and you may find a hot or warm spot in you home. Plumbers refer to this as a slab leak because it usually occurs under a slab of concrete, whether it’s a sidewalk, patio, or a leak under the foundation.p>
 Scott was very knowledgeable and happy to test out all items of my finikie hot water heater. He called in tech support and tested pressures and did a vent pipe test to check air flow. How do I know this, because he explained everything to me. One afternoon with him, and I could be a tech. All joking aside. I appreciate the continued support of Atomic. Scott's professionalism and willingness to keep me in the loop is spot on. Thanks Scott. 

Plumbers may not go out of their way to let you know that a toilet or sink can be moved. But if you’ve been working with them on a renovation, and they tell you something can’t be transferred to a new space, ask them to explain to you in detail why not. Speaking of things people don’t want to tell you, here are 10 things your neighbor isn’t being up-front about.
You’ll know when it’s time to install a new water heater. Water heater installation costs average between $360 and $780 nationally, with rates increasing depending on the project. The total project cost will be higher when you include the cost of the heater itself. Select your new water heater based on the number of occupants in your home and the number of gallons of capacity you’ll need. Installation costs can vary based on the type of water heater you are removing and the type you are installing, any necessary repairs, regional cost of labor, and whether disposal of the old heater is included. Natural gas water heaters retail on average between $650 and $900 for standard models. Electric water heaters range between $300 and $700 for standard models. Tankless electric water heaters retail on average between $250 and $700 for standard models. Tankless gas water heaters retail on average between $200 and $1,300.

Mounted under the sink, the garbage disposal is meant for chopping up small bits of waste food.  When switched on the motor spins and impellers — also called lugs — throw bits of food against a grinder ring. You should always run water while using the garbage disposal; once the garbage disposal does its job, the water flushes the finely chopped particles down the drain.
Cleaning your toilet is likely a top priority when it comes to house maintenance, but you’re doing more harm than good if you use chlorine tablets. They can cause the toilet’s flushing system to malfunction by disintegrating it and getting stuck in the flush valve. Check out these 28 tips to become a master plumber and avoid unnecessary calls to the experts!
Atomic Plumbing & Drain Cleaning provided Expert Plumber Jimmy Powell to diagnose and perform an emergency repair at my home. I had experienced flooding from poor workmanship by one of their competitors, who then refused to help me. When I contacted Atomic Plumbing with an emergency request, they stepped up immediately to assist me, and sent their plumber Jimmy P., who identified and corrected the poor workmanship that caused the flooding. Very knowledgeable in his trade, confident in the correction that he crafted, and he is a genuine good person. I would have been pleased with that much, but the reasonable price for the emergency work and the 1 year warranty that Jimmy presented on behalf of Atomic Plumbing brought it all home for me. This is a company that stands behind their good name and will send you the very best plumbing professionals when you are having a bad plumbing day. I am so glad that I contacted Atomic and met Jimmy. You will be too. Call Atomic Plumbing FIRST!
Wooden pipes were used in London and elsewhere during the 16th and 17th centuries. The pipes were hollowed-out logs, which were tapered at the end with a small hole in which the water would pass through.[16] The multiple pipes were then sealed together with hot animal fat. They were often used in Montreal and Boston in the 1800s, and built-up wooden tubes were widely used in the USA during the 20th century. These pipes, used in place of corrugated iron or reinforced concrete pipes, were made of sections cut from short lengths of wood. Locking of adjacent rings with hardwood dowel pins produced a flexible structure. About 100,000 feet of these wooden pipes were installed during WW2 in drainage culverts, storm sewers and conduits, under highways and at army camps, naval stations, airfields and ordnance plants.
×