I needed a neutral place to research plumbing jobs: had the suspicion I was being 'led down a garden path' because I knew nothing - other than how expensive it was and how urgent  'do it NOW!" it was. I appreciate the cost estimate and national average pages which confirmed my suspicions.  I found another plumber through this site and hope for better, less panic, less cost service from now on. Thanks.
I have used atomic a couple of times and have received nothing but great service! When we first bought our house, we hadn't moved to the area yet and weren't moving for another month. We drove down for a weekend to get the A.C. replaced, and found the sink in the master bath (that the previous owner just had installed) had flooded the whole bedroom. I believe it was Eric who helped us, and he was wonderful. Despite it being July, and no A.C, he took care of us without complaint. And because we were going back home in the next couple days he made sure to get it done quickly!Recently we decided to replace our water heater and didn't hesitate to call Atomic. Ryan and Zach helped us this time and provided the same level of service I expected! They were polite, clean and made sure everything went smoothly. Atomic is definitely a little pricer than some smaller companies, but you get what you pay for and I'd rather pay to get it done correctly the first time than later when your water line snaps in the master bathroom and you're out of town.
Sump pumps are used to re-route water away from the lowest point of your home's foundation and protect your basement and easily damaged areas from flooding. In most cases, your sump pump is hardwired to your electrical system or possibly plugged into a wall outlet. Because these power sources can often fail in a storm when water damage occurs, sump pumps are typically equipped with battery backup power.
Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]
Plumbers are expensive because it is a highly specialized trade requiring thousands of hours to master. Additionally, they make house calls meaning they spend time and money investing in vehicles, tools, equipment and gas to bring to you. They also carry insurance and have other overhead expenses. Labor shortages in the field also contribute to premium pricing.
Plumbers in Australia have licensing requirements that differ from state to state but it is generally accepted a 4-year apprenticeship with a further minimum experience of 2 years (6 years total) and a further curricular requirement as a benchmark for licensing. Licensed plumbers are also expected to maintain minimum relevant training requirements to maintain their plumbing license

No plumber is going to come right out and explain that they don’t have the required license to work for you. So if you know someone who is a great plumber, but they don’t have a license, hire them at your own risk. Licensed plumbers know the local building codes and regulations, have completed a certain amount of hours on the job and are insured. Want to become a master plumber yourself? Here are 28 tips.


Whatever your preference and price point, there’s a tub to sooth. That’s, of course, if you want a bathtub. Many homeowners — particularly those who don’t have young children living with them — have thrown the tub out with the bath water in favor of installing a walk-in shower. Just make sure to consider the pros and cons of tub to shower conversions.
I had another lady who said she wanted to run to the grocery store to get some coffee to make for me and my guys while we were installing her new kitchen. She said she was just gonna run to the store and asked if we wouldn’t mind keeping an eye out for her one-year-old daughter who was sleeping at the time. We said fine, but she ended up not returning until four hours later. The kid was screaming her head off and we didn’t know what to do. We tried holding her. We didn’t know if she was hungry or what to feed her. She just kept crying.

Beginning in the 1950s plastic pipe, most notably that made of polyvinyl chloride, has been used in ever increasing amounts. In the following decades, other plastics were introduced into pipe manufacture. However, by the last years of the century a number of plastic-pipe failures had occurred. Problems were attributed to defective manufacture and, in some cases, a chemical reaction taking place between the material used to make the pipe and chlorine in the water that it carried. These events led to class action lawsuits and a general reevaluation of the use of this inexpensive and easily worked alternative piping material.
Help! The toilet won’t stop running. It’s a bummer, sure, but it’s something you don’t need to call your plumber about. In fact, DIYers should take note that it’s a quick fix that will cost you just $5. For instance, your handle might just be sticking, which can be solved by spraying some lubricant where the handle meets the porcelain. Ready to DIY? Here’s how to fix a running toilet.
When your plumbing system is not running smoothly, you need a reliable plumber there to assist you as quickly as possible. But you should also find an expert who can help you with all of your plumbing needs over time, whether you want to upgrade your fixtures or add in a new sump pump or water treatment system. Call our professionals whenever you run into urgent plumbing issues, and we can get out there fast to get your pipes and fixtures back in order. Magnolia Plumbing, Heating & Cooling is a trusted name in plumbing repair, installation, maintenance, and replacement in the Washington, DC area, and we can handle whatever plumbing tasks come our way—guaranteed!
Cast iron and ductile iron pipe was long a lower-cost alternative to copper, before the advent of durable plastic materials but special non-conductive fittings must be used where transitions are to be made to other metallic pipes, except for terminal fittings, in order to avoid corrosion owing to electrochemical reactions between dissimilar metals (see galvanic cell).[17]
Each Government at the state level has their own Authority and regulations in place for licensing plumbers. They are also responsible for the interpretation, administration and enforcement of the regulations outlined in the NCC.[38] These Authorities are usually established for the sole purpose of regulating plumbing activities in their respective states/territories. However, several state level regulation acts are quite outdated, with some still operating on local policies introduced more than a decade ago. This has led to an increase in plumbing regulatory issues not covered under current policy, and as such, many policies are currently being updated to cover these more modern issues. The updates include changed to the minimum experience and training requirements for licensing, additional work standards for new and more specific kinds of plumbing, as well as adopting the Plumbing Code of Australia into state regulations in an effort to standardise plumbing regulations across the country.[39]

For many centuries, lead was the favoured material for water pipes, because its malleability made it practical to work into the desired shape. (Such use was so common that the word "plumbing" derives from plumbum, the Latin word for lead.) This was a source of lead-related health problems in the years before the health hazards of ingesting lead were fully understood; among these were stillbirths and high rates of infant mortality. Lead water pipes were still widely used in the early 20th century, and remain in many households. In addition, lead-tin alloy solder was commonly used to join copper pipes, but modern practice uses tin-antimony alloy solder instead, in order to eliminate lead hazards.[13]

×