Don’t fix it if it’s not broken, right? While the saying makes sense, when it comes to plumbing, it’s best to simply keep an eye on things. This means not overlooking toilets, sink drains, pipes and valves. And, it’s a good idea to schedule an annual maintenance appointment with your plumber, so you don’t have to pay a ton of money later! Got a leak? Here’s how to fix a water-shutoff valve that’s leaking.

Where plumbing had been a mostly locally regulated matter for most of its history, the federal government became involved in the early 1990s. Until the 1950s, toilets generally used five or more gallons per flush (GPF). During the decades that followed, the plumbing industry reduced the standard volume for toilet flush tanks to 3.5 gallons. A further reduction in volume resulted from the Energy Policy Act of 1992, which in the name of conservation mandated that all new toilets made in the United States must use no more than 1.6 GPF. The same legislation also regulated the flow in shower heads and faucets. Although the first low-flow toilets proved un-satisfactory and were met with public disapproval, redesigned equipment employing new technology has removed most objections.
Ryan and Zach came to my house on both Saturday nigh and Sunday. I had a houseful of company one person was 86 years old and our plumbing was backed up. Ryan was able to get us comfortable for Saturday night and assuring me that the flooding would stop. On Sunday he and Zack came out and fixed the problem. Both were not only very professional but also very personable and easy to work with. They addressed the problem and thoroughly checked out our septic system to ensure that everything was running smoothly.. atomic plumbing went above and beyond in a time of need for the Lamb family and I thank them immensely for their efforts and service. Sincerely Donald
JJ's Plumbing Repair has no control over, and assumes no responsibility for, the content, privacy policies, or practices of any third party web sites or services. You further acknowledge and agree that JJ's Plumbing Repair shall not be responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such content, goods or services available on or through any such web sites or services.
Robert is knowledgeable, respectful and arrived within the time parameters he told me he would. He clearly communicated our problem to us and is working diligently to rectify it. I have to add, cleanliness in our household is of the utmost importance and Robert is meticulous with his work and pretty much left no trace of his presence when he was done. That part of the service in and of itself is invaluable.
Are you worried about the corrosion in your plumbing or have you had leaks in the past? Option One Plumbing in Phoenix, San Diego and the Inland Empire offers affordable solutions to re-plumbing your home with copper or alternatives that exceed today’s standards and last longer. If you are looking for an experienced repiping plumber in Phoenix, San Diego and the Inland Empire, look no further.
Westbrook knows that quality construction starts with quality plumbing. Our design build experts use the latest techniques and technology to ensure that every building is fitted, piped and pressurized for maximum water flow and efficiency. With Westbrook’s team of plumbing experts, you can be sure that any new building won’t go without clean and safe water service.
Locally owned and operated for over 30 years, BelRed has been providing high-quality service to customers since 1986. Begun as a small heating and air conditioning services business, we've grown into one of the largest HVAC companies in western Washington, and we credit our success to our decades of satisfied customers and HVAC products. Along with superior service, BelRed has always been at the forefront of HVAC offerings, and continues to offer new solutions to optimize comfort and efficiency.
We have used Atomic multiple times and every time they have done a phenomenal job! We've had 2 different plumbing specialist, both named Justin, and each have been wonderful and knowledgeable in helping us with our problems. Our most recent issue was a leaking service line. Atomic had Justin D. to my house at 7pm, and was able to schedule me for next day repairs! I will only use and recommend Atomic as my plumbing service!
I am not a plumber, but I am familiar with oxidation.  Many simple plumbing valves only need to be removed and new "O" rings installed.  That's where the problem comes in.  Most older homes used metal pipes and not PVC.  Usually the valve screws into a different type of metal and oxidation occurs between the two metals, almost becoming one.  In order to get the valve stem out you have to break it loose.  If you break the pipe, not only do you have a mess but then you have to pay to fix it.  Simple if you break it you pay.  If a plumber breaks it, he is responsible.  I recommend paying the plumbers fee and save yourselves headaches in the long run. 
Wedgeworth Plumbing, is a Texas (TX) Plumbing, Water Heater, Piping, Drain Cleaning, Sewer & Water Line service, replacement and maintenance Company located in Houston area. Wedgeworth Plumbing employs only the best technician and plumber for plumbing repair, water heater repair, and piping repair as well as plumbing replacement, sewer & water line replacement, and water heater replacement in Baytown TX, Bellaire TX, Cypress TX, Deer Park TX, Dickinson TX, Friendswood TX, Houston TX, Katy TX, Kemah TX, La Porte TX, League City TX, Missouri City TX, North Houston TX, Pasadena TX, Pearland TX, Richmond TX, Rosenberg TX, Santa Fe TX, Seabrook TX, South Houston TX, Spring TX, Stafford TX, Sugar Land TX, and Webster TX. So when you ask to find "A good plumbing repair or service company near me", you've come to the right place. To set-up a repair service estimate or replacement estimate, call (832) 867-5309. Wedgeworth Plumbing services all plumbing, piping, filter, and water heater brands including AO Smith, Bradford White, Rheem, Rinnai, State Water Heaters, among many others.
Home repairs and maintenance shouldn’t get pushed to the bottom of the to-do list. Unfortunately, most people don’t think they need plumbing repair services until there’s an emergency. While some plumbing issues may seem minor, they could actually be serious emergencies in the making. Routine repairs from Mr. Rooter® Plumbing are affordable, and they’ll save you from paying for emergency plumbing rescue in the future.

The introduction of the first water-retaining traps or seals in the 1850s, and the common use of "U"-shaped traps in the 1870s, were major steps forward. The design of the trap ensured that enough water remained in it to effectively block the passage of sewer gas back through the plumbing fixtures. During the 1870s vent pipes were introduced. They not only carried sewer gas out of the system, but also broke the suction created by movement of liquid in the pipes and eliminated the possibility of siphoning water that sealed the traps.
Ryan arrived right on time and was very cordial and friendly. He got right to work and provided me a very thorough description of the things that needed attention, and subsequently provided pricing for each of the requested service options and the extras that were also identified. He really did a great job and we were extremely satisfied. I recommended your company to a friend yesterday, and will definitely continue to use and recommend your company for future plumbing needs!Bravo Zulu Ryan.
For many centuries, lead was the favoured material for water pipes, because its malleability made it practical to work into the desired shape. (Such use was so common that the word "plumbing" derives from plumbum, the Latin word for lead.) This was a source of lead-related health problems in the years before the health hazards of ingesting lead were fully understood; among these were stillbirths and high rates of infant mortality. Lead water pipes were still widely used in the early 20th century, and remain in many households. In addition, lead-tin alloy solder was commonly used to join copper pipes, but modern practice uses tin-antimony alloy solder instead, in order to eliminate lead hazards.[13]
×