You are sitting in your living room and hear what sounds like water dripping. You check all the sink faucets, toilets, tubs, showers, spigots. Nothing is on that you can see. You return to your chair. You still hear the sound. It’s not the dishwasher or washing machine either. Not the ice maker in the freezer. What is making the sound? You retrace your steps, this time checking inside the cabinet under each sink. Ah ha! There it is. Your kitchen drain pipe is dripping. Leak detected.
Similarly, there's no shortage of different types of sinks, too. These range from spare single-bowl models starting under $100 to a farmhouse apron front, double bowl made of copper or cast iron that can run $600 or more. Some are mounted under countertops — called undermount sinks — while drop-in sinks are designed for installation in a preexisting space in your countertop. Whatever the type, sinks can uniquely complement kitchen design as do countertops, cabinetry and other features.
I needed a neutral place to research plumbing jobs: had the suspicion I was being 'led down a garden path' because I knew nothing - other than how expensive it was and how urgent  'do it NOW!" it was. I appreciate the cost estimate and national average pages which confirmed my suspicions.  I found another plumber through this site and hope for better, less panic, less cost service from now on. Thanks.

Of course, some repairs are easier and quicker to handle than others. Some are a major hassle—particularly those that involve working on pipes that are hidden behind walls or under floors or are otherwise difficult to access. This doesn’t mean you can’t do them yourself, it just means you may need a little more instruction, a few more tools, and a load of patience.

Our water heater busted on Saturday. Sean came right out and was very informative and helpful. He explained that they would need to secure our type of water heater and once successful he would be out first thing Sunday morning to install it. He was here first thing at 7:30 AM with a smile on his face and removed the old water heater and installed the new one in no time. Sean is very knowledgeable and personable. My husband and I enjoyed talking about Football with him while he was here. I would also like to mention Tiffany, the dispatcher, she was great as well, very helpful when I made the initial call. I would definitely recommend Atomic Plumbing and Sean to anyone needing plumbing work done in the future.
Plastic pipe is in wide use for domestic water supply and drain-waste-vent (DWV) pipe. Principal types include: Polyvinyl chloride (PVC) was produced experimentally in the 19th century but did not become practical to manufacture until 1926, when Waldo Semon of BF Goodrich Co. developed a method to plasticize PVC, making it easier to process. PVC pipe began to be manufactured in the 1940s and was in wide use for Drain-Waste-Vent piping during the reconstruction of Germany and Japan following WWII. In the 1950s, plastics manufacturers in Western Europe and Japan began producing acrylonitrile butadiene styrene (ABS) pipe. The method for producing cross-linked polyethylene (PEX) was also developed in the 1950s. Plastic supply pipes have become increasingly common, with a variety of materials and fittings employed.
Our goal in business is to treat all of our customers like friends; always treating them with respect, fairness, and honesty. We are a family owned and operated Connecticut plumbing company, and because of this all of our customers receive the attention that they deserve. Mike Marandino, the owner of the company, (as well as master plumber) works out on the road right alongside his employees. He or his wife handles all calls personally and it's the personal touch that makes us special. We strive for 100% satisfaction, and if for any reason a customer of ours isn't satisfied we promise we'll make it right.
I was disappointed with the pressure of a tub and shower that were plumbed with 1/2 supply lines (2nd floor). Could be low pressure from the street, but I want to replace with 5/8. Plus, I'd like to have 2 back to back showers, one inside and one outside. So, I had intended to bring a 1 supply to both, then branch up to valves and shower head with 5/8. Finally, I thought pressure from the street was typically 55 to 70 psi and I am concerned if pvc can take that.Any thoughts?
For many centuries, lead was the favoured material for water pipes, because its malleability made it practical to work into the desired shape. (Such use was so common that the word "plumbing" derives from plumbum, the Latin word for lead.) This was a source of lead-related health problems in the years before the health hazards of ingesting lead were fully understood; among these were stillbirths and high rates of infant mortality. Lead water pipes were still widely used in the early 20th century, and remain in many households. In addition, lead-tin alloy solder was commonly used to join copper pipes, but modern practice uses tin-antimony alloy solder instead, in order to eliminate lead hazards.[13]
Galvanized steel potable water supply and distribution pipes are commonly found with nominal pipe sizes from 3⁄8 inch (9.5 mm) to 2 inches (51 mm). It is rarely used today for new construction residential plumbing. Steel pipe has National Pipe Thread (NPT) standard tapered male threads, which connect with female tapered threads on elbows, tees, couplers, valves, and other fittings. Galvanized steel (often known simply as "galv" or "iron" in the plumbing trade) is relatively expensive, and difficult to work with due to weight and requirement of a pipe threader. It remains in common use for repair of existing "galv" systems and to satisfy building code non-combustibility requirements typically found in hotels, apartment buildings and other commercial applications. It is also extremely durable and resistant to mechanical abuse. Black lacquered steel pipe is the most widely used pipe material for fire sprinklers and natural gas.

Your water heater is an essential part of your home, heating water for showers, dishwashing, laundry and more. On average, a traditional water heater will last 8-12 years. The general consensus is that it’s better to replace your water heater with a new one than to repair one that’s 10 years old or more. Older models are less energy-efficient and thus more costly to run than newer models with better technology. Here are some indicators of when it may be time to replace an old water heater instead of repairing it:


 CON'T FROM COMMENTS EARLIER.  However,  the  installation took less than 3/4/ hour and was a basic regulator with no other function.  Looking up the price afterwards, invoice did not list type or price, it appears that it would have cost me around $60 for the regulator and another $15 or so for the additional supplies necessary to install it and it was really a rather simple job with easy access.    Given that, it seems that $300 for less that  an hours worth of on site work,  company says it does not include commute time in its prices, is a little high.  While flat rate quotes are nice, they must take into consideration situations where the work load differs depending on the circumstances.  Therefore, unless you are at the upper end of the harder work needed than the average job. it can be argued that my estimated price of $300 for labor was more than a little high.  Maybe I am wrong since I have not used their services for years and  am not knowledgeable of the costs of equipment and professional labor today.  

Our water heater busted on Saturday. Sean came right out and was very informative and helpful. He explained that they would need to secure our type of water heater and once successful he would be out first thing Sunday morning to install it. He was here first thing at 7:30 AM with a smile on his face and removed the old water heater and installed the new one in no time. Sean is very knowledgeable and personable. My husband and I enjoyed talking about Football with him while he was here. I would also like to mention Tiffany, the dispatcher, she was great as well, very helpful when I made the initial call. I would definitely recommend Atomic Plumbing and Sean to anyone needing plumbing work done in the future.


Pipefitters, sometimes simply called fitters, install and maintain pipes that carry chemicals, acids, and gases. These pipes are used mostly in manufacturing, commercial, and industrial settings. Fitters install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize as gasfitters, sprinklerfitters, or steamfitters.
Need a quick fix? After having a plumber come out to your house, they might tell you the part needed to fix your toilet or sink issue is going to take a week. Don’t be too amenable if you can’t wait. There’s no shame in working with another plumber who can get the part and do the job when you need it. If you’re doing the job yourself, be sure you know these tips for completing a plumbing fix like a pro.

Payment schedule: On a big job, especially a planned remodeling, the service provider may want the customer to pay 10 to 15 percent of the cost up front and 50 percent paid before the job is completed — especially if expensive materials need to be purchased for the project. Make sure you know what is expected. If you're suspicious, contact your state's professional licensing board or contracting board to ask about local standards. Many states set limits on what is allowed to be paid upfront.
A company may charge approximately $1,000 to replace a 50-gallon tank-style electric water heater (not including any upgrades required by building codes). Replacing a gas-powered water heater might cost $1,100 (not including code upgrades). Some companies roll the disposal of an old heater into the overall cost of the new water heater installation. Other professionals charge an additional removal fee that can range from $35 to $150.
Hello, We have a Hunter ceiling fan that no longer spins. It has power, as the light still works and when you push the remote you hear the clicking, like it's trying to engage, but the blades do not spin. Does this sound like a possible flywheel issue? I removed the Remote Receiver, part 85112-02, and apparently it's no longer available, but I don't think the receive is the problem. Any feedback would be welcome.
Hello I had a plumber do an estimate for me to replace our copper pipes with plastic as we have no existing walls up in our basement yet...pretty basic job... so we figured we could upgrade as we do live in Northern Ontario and it does tend to get quite cold here in the winters.  We dont have any existing problems with our plumbing right now just figured it would be good time to do the job and perhaps change the pipes to 3 quarter inch for faster flow.  Well I never thought in all my life I would get an estimate back that would state $350.00 an hour in labor...yes that is correct $350.00 an hour...estimated 10 hours for the job to be completed.  So he quoted me $3500.00 for labor alone.. not supplies?  Well needless to say I will be happy with my half inch copper pipes and will happily wait for my bathtub to fill up at a slower pace.  Just wanted to know what your thoughts are on this $350.00 an hour quote?  Thank you and enjoy your day.
A handyman walked away from the job after cutting off the water to my mother's house and removing a toilet. He did this while I was attending a funeral. My mother is 87 years old. Called Atomic Plumbing and Ryan Dean responded Saturday afternoon and restored water to the house. He finished the job Sunday morning. He was the nicest, courteous, neat plumber I have ever met. I can't say enough good things about Atomic Plumbing from the employee who took my call to Ryan Dean's excellent service.
Each Government at the state level has their own Authority and regulations in place for licensing plumbers. They are also responsible for the interpretation, administration and enforcement of the regulations outlined in the NCC.[38] These Authorities are usually established for the sole purpose of regulating plumbing activities in their respective states/territories. However, several state level regulation acts are quite outdated, with some still operating on local policies introduced more than a decade ago. This has led to an increase in plumbing regulatory issues not covered under current policy, and as such, many policies are currently being updated to cover these more modern issues. The updates include changed to the minimum experience and training requirements for licensing, additional work standards for new and more specific kinds of plumbing, as well as adopting the Plumbing Code of Australia into state regulations in an effort to standardise plumbing regulations across the country.[39]
For details about apprenticeship or other opportunities in this occupation, contact the offices of the state employment service; the state apprenticeship agency; local plumbing, heating, and cooling contractors or firms that employ fitters; or local union–management apprenticeship committees. Apprenticeship information is available from the U.S. Department of Labor's Apprenticeship program online, or by phone at 877-872-5627.
Alexa is an experienced lifestyle and news writer, currently working with Reader's Digest, Shape Magazine, and various other publications. She loves writing about her travels, health, wellness, home decor, food and drink, fashion, beauty, and scientific news. Follow her traveling adventures on Instagram: @living_by_lex, send her a message: [email protected], and check out her website: livingbylex.com
Apprentice plumber: Apprenticeship programs generally provide the most comprehensive training for novice plumbers. Either union locals and their affiliated companies or nonunion contractor organizations can administer this training. Apprenticeships typically consist of at least three to four years of paid, on-the-job training and some hours of related classroom instruction.
The easy to install reinforced Wax Toilet Bowl The easy to install reinforced Wax Toilet Bowl Gasket features a polyethylene flange for floor and wall bowls. Packaged in a plastic sleeve in order to maintain its shape. Accommodates 3 in. and 4 in. waste lines (sold separately). Includes a 1/4 in. x 2-1/4 in. E-Z Snap brass bolt ...  More + Product Details Close

Master plumbers on construction jobs may be involved with developing blueprints that show the placement of all the pipes and fixtures. Their input helps ensure that a structure’s plumbing meets building codes, stays within budget, and works well with the location of other features, such as electric wires. Many diagrams are now created digitally with the use of Building Information Modeling (BIM), which allows a building’s physical systems to be planned and coordinated across occupations.
Drain Rescue is definitely true to it's name. My drain was completely blocked and not at all functional when I called them. They asked if I needed someone to come out the same day (it was evening). I declined since it wasn't really an emergency, just a huge inconvenience. The plumber came out right on the time the next morning and had my drain fixed in about 30 minutes. The service was excellent and the price was reasonable. I would definitely recommend them to anyone needing a plumber.
Pay by Experience for a Plumber has a positive trend. An entry-level Plumber with less than 5 years of experience can expect to earn an average total compensation of $37,000 based on 1,867 salaries provided by anonymous users. Average total compensation includes tips, bonus, and overtime pay. A Plumber with mid-career experience which includes employees with 5 to 10 years of experience can expect to earn an average total compensation of $47,000 based on 1,454 salaries. An experienced Plumber which includes employees with 10 to 20 years of experience can expect to earn an average total compensation of $52,000 based on 2,028 salaries. A Plumber with late-career experience which includes employees with greater than 20 years of experience can expect to earn an average total compensation of $55,000 based on 1,197 salaries.
At Amanda Plumbing Sewer & Drain, we take care of all of your plumbing needs in Powell, OH and the surrounding areas. From drain cleaning, sewer cleaning, and excavating services to kitchen and bath remodelling, our expert workmanship guarantees you the best results for your home or business. Our experienced plumbers have more than 100 years of combined experience and we are ready to deliver the trusted local plumbing service you can rely on.

Plumbing Repair Company

×