Wooden pipes were used in London and elsewhere during the 16th and 17th centuries. The pipes were hollowed-out logs, which were tapered at the end with a small hole in which the water would pass through. The multiple pipes were then sealed together with hot animal fat. They were often used in Montreal and Boston in the 1800s, and built-up wooden tubes were widely used in the USA during the 20th century. These pipes, used in place of corrugated iron or reinforced concrete pipes, were made of sections cut from short lengths of wood. Locking of adjacent rings with hardwood dowel pins produced a flexible structure. About 100,000 feet of these wooden pipes were installed during WW2 in drainage culverts, storm sewers and conduits, under highways and at army camps, naval stations, airfields and ordnance plants.
5 star for Atomic Plumbing.I called mid Saturday morning, Kimberly took my information and called me back promptly to let me know that Jim Miller was coming.Jim was professional, evaluated and diagnosed the issue within 10 minutes, had great customer service and let us know what the cost was before he started to work.Turns out our toilet was over flowing and leaked to downstair rooms. I would highly recommend Atomic Plumbing, thank you for great customer service!!!
Ryan arrived on time with a positive attitude even though it was after hours on a Friday and did a great job. He quickly diagnosed and fixed the plumbing problem and answered several other questions I had regarding upgrades to bathroom fixtures. I was very impressed that Atomic was able to get a technician to my house within a few hours on a Friday night a few days before Christmas. Very professional organization and technician.
CON'T FROM COMMENTS EARLIER. However, the installation took less than 3/4/ hour and was a basic regulator with no other function. Looking up the price afterwards, invoice did not list type or price, it appears that it would have cost me around $60 for the regulator and another $15 or so for the additional supplies necessary to install it and it was really a rather simple job with easy access. Given that, it seems that $300 for less that an hours worth of on site work, company says it does not include commute time in its prices, is a little high. While flat rate quotes are nice, they must take into consideration situations where the work load differs depending on the circumstances. Therefore, unless you are at the upper end of the harder work needed than the average job. it can be argued that my estimated price of $300 for labor was more than a little high. Maybe I am wrong since I have not used their services for years and am not knowledgeable of the costs of equipment and professional labor today.
At Magnolia Plumbing, Heating & Cooling, we offer 24/7 emergency plumbing services for all of our clients in the Washington, DC area. But is your plumbing issue urgent enough to call us? If you’re asking this question, the answer is most likely a yes. We can get to your home quickly and restore your plumbing system so that you continue to have access to potable water, or so that your home is protected from a burst pipe or a smaller leak.
Needed to replace a water pressure regulator. Looking at the retail costs of the regulator, they seem to run from abouit $60 to over $300 for one that includes more that the basic control of water pressure in the house. Had not used a pro plumber for over 20 years so I was not up on the costs associated with needing their help. I was contacted by at least 3 plumbers but only one, Right Now Plumbers, gave me an instant quote of $394 for the service without me even asking. Although I thought this price seemed a little high for a job that takes less than an hour to complete, I accepted their service. Must say that the job was done very professionally and would use them again if needed. However,
I was disappointed with the pressure of a tub and shower that were plumbed with 1/2 supply lines (2nd floor). Could be low pressure from the street, but I want to replace with 5/8. Plus, I'd like to have 2 back to back showers, one inside and one outside. So, I had intended to bring a 1 supply to both, then branch up to valves and shower head with 5/8. Finally, I thought pressure from the street was typically 55 to 70 psi and I am concerned if pvc can take that.Any thoughts?